This series solenoid is applied to single-phase full wave rectifying DC power supply control circuits,which voltage can reach 220V, as a power component of the hydraulic solenoid directional valve .It can be used in NG6,NG10 of YUKEN solenoid directional valve,which is junction box screw connected.
Usual service conditons:
It can be installed randomly.
There is no gas or dust in ambient which can corrupt metal or destroy nonconductor.Or,it will affect the lifetime of products.
The solenoid is applicable for the continuous duty system or intermittent periodic duty system.
The reasonable wave range of supply voltage is between 85%-110%(any special requirements is possible).
The protection is IP65 class.
|Rated Voltage(V)||12 24 100 220|
|Static oil pressure(Mpa)||16|
Externality & Installation Dimensions:
The socket, which solenoids used ,is according to ISO4400 standard.Including two specifications:indicator light & without light.You can choose according to your inquirements.The voltage of the socket ,with indicator light,must conform to the voltage of solenoid itself.
The pushpin of the solenoid is used in adjustment or sometimes in emergency,but when the backpressure of the system is higher,please use screwdriver to push it,not strike it.The wallop can destroy the pushpin and surface of the leading hole,or the solenoid will leak oil or can't reposition.
There is a protector of over-current between electrical control system and solenoid,in order to prevent the solenoid and the electrical component from burning in improper conditions.
Explanation of Sample:
If client have special requirements,we can adjust the connect dimension,the extended length of push pin,and the supply voltage between solenoids and valve body.
Characteristic curve for reference only.
The main performance parameter is obtained in the conditions of lab.Finally explanation and changing of the parameters by KAIDI.
|Minimum Order:||1 Piece/Pieces|
|Payment Terms:||L/C,T/T,Western Union|