electro-magnetic flow meter:
-Accuracy:0.2% (Customize),0.5% (Standard);
-IP65/IP68 protection.

                              electro-magnetic flow meter

Technical Parameters for electromagnetic flowmeter
Caliber DN3~DN3000mm
Nominal Pressure0.6~4.0MPa(special pressure can be made too)
Accuracy±0.5%,±0.3% or ±0.2% are selectable
Liner materialTeflon,PFA,F46,Neoprene,Polyurethane
Electrode TypeGeneral type ,scraper type and replaceable type
Electrode materialStainless steel SUS316,Hastelloy C,Titanium,Tantalum Platinum-iridium,Stainless steel covered with tungsten carbide
Medium TemperatureIntegral type-20°C~+60°C
Remote typeNeoprene & Polyurethane Liner-10°C~+80°C
PTFE Liner /PFA Liner /F46 Liner-10°C~+160°C
Ambient Temperature-25°C ~+ 60°C
Ambient Humidity5~100%RH(relative humidity)
Medium Electrical conductivity≥20μ s/cm
Measuring Range1500:1,flow rate<15m/s
Structure type Integral type,remote type,submersible type,ex-proof type
Protection ClassIP65,IP68(optional)
Ex-proof MarkExmdⅡT4
Product StandardJB/T 9248-1999 Electormagnetic Flowmeter
Main performances of the electromagnetic flowmeter lining materials
Lining material Main Performance  Applications

1.The most steady material in plastics which is resistibal to boiling hydrochloric acid,vitriolandqua fortis as well as strong alkali and organic impregnates.        

2.Not be perfect in abrasion resistance.

Strong corrosive mediums such as strong acid and alkali
PFAHaving the same abrasion resistance with PTFE.Having strong ability of load pressure resistance.Applicable in state of load pressure
F461.Have the same abrasion resistance with PTFE.2.Resistable for low abrasion.3.Having strong resistance to load pressure.1.The same as PTFE.2.Applicable in mediums of low abrasion.
Neoprene  1.Be of good elasticity,retractility and abrasion resistance.2.Be resistant to low aicd,alkali and salt but not for oxidation mediums.Water,sewage and slurry,mineral serosity of low abrasion.

1.Be of good abrasion resistibility.

2.Not be perfect in acid/alkali resisitance.3.Can't be used for water mixed with organic impregnants.

Applicable in mineral serosity,slurry and coal slurry of high abrasion.
  Main performances of the electromagnetic flowmeter electrode materials
Electrode materialApplications
SUS316Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol,chemistry,carbamide,etc
Stainless steel     covered with tungsten carbideApplicable in mediums of no corrosive and low abrasion.
Hastelloy B(HB)Having strong resistance to hydrochloric acid of any consistance which is below bioling piont.Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt.
Hastelloy C(HC)Be resistant to oxidable acid such as nitric acid,mixed acid as well as oxidable salt such as Fe+++,Cu++and sea water
TitaniumApplicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid(including fuming nitric acid),organic acid,alkali etc.Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid)corrosion.But if acid contains antioxidant(such as Fe+++,Cu++)is greatly reduce corrosion.
TantalumHaving strong resistance to corrosive mediums that is similar with glass.Almost applicable in all chemical mediums.Except for hydrofluoric acid,oleum and alkali.
Platinum-iridium  Almost be applicable in all chemical mediums except for aqua fortis,ammonium salt.

Flow quantity and Flow rate Comparison Table 


FOB Price: US $ 299 - 4,999 / Set |
Minimum Order: 1 Set/Sets
Port: qingdao,china
Payment Terms: L/C,T/T

Jack Hu's Products

You can verify Jack Hu using your contacts and professional networks.

Recently Viewed Products
Popular Products on Tradesparq