Thank you for choosing TELIKOU intercom product. WS-200D/4M is designed for a certain kind use, Two-channel recessed main station suitable for the situation which needs the equipments mounted on
This system adopts wired connection, and has following features, free of external emission interference, stable and reliable performance, flexible configuration, full-duplex communication, clear and loud communication sound, easy operation, and strong noise resistance.
1. Headset connector
4-pin XLR Male or 5-pin XLR female connector
EARPHONE: Dynamic 50-2000 ohm
MICROPHONE: Dynamic 100-600 ohm
The wiring of headset is as follows:
Pin 1--Mic common
Pin 2--Mic hot
Pin 3--headphone common
Pin 4--headphone hot
2. Panel Mic Connector
WS-200A uses a double-purpose connector which supports XLR plug or 1/4inch plug unbalanced microphone.
The wiring of 3-pin XLR microphone is as follows:
Pin 1 -- Mic common
Pin 2 -- Mic hot
Pin 3 -- Null
4. Microphone Switch Button (Mic)
Press microphone button will turn on the microphone and the green LED light at right. The audio signal from microphone will be sent thought intercom line. Press microphone button again, the microphone and LED light will be turned off. When WS-200 is connected to any stranded TELIKOU main station, this microphone switch button can be
turned off by RMK function on main station.
When the front panel speaker is turned on, pressing microphone button will reduce the speaker output level about 6dB to help minimize the feedback.
After talking, the microphone should be turned off.
5. Speaker Switch
The Speaker Switch turns the front panel speaker on or off.
When the front panel speaker is turned on, pressing Mic button will reduce the speaker output level about 6dB and helps minimize feedback.