V2605F 1FX/1UTP+3UTP P2P CPE

1,V2605F is a 4-port L2 switch, developed by V-SOLUTION.
2,Offer OEM \ ODM service and customize design

Switch V2605F introduction

It integrates 3x downlink 10/100Base-TX, 1x uplink 100Base-FX or 10/100Base-TX, supports CLI based on UART. It can be well used for P2P or PTN.

Technical Parameters

Items	Descriptions
Uplink	1x 100Base-FX or 10/100Base-TX, SC single mode / duplex fiber, symmetrical 100Mbps
Wavelength	1100 ~ 1600nm
Fiber connector	SC connector
Downlink	3x auto-negotiation 10/100Mbps Ethernet ports, half / full duplex, AUTO-MDIX, compliant with IEEE802.3, 802.3u, 802.3x technical regulations, RJ45 connector
UART	1x RS232 serial port, used for CLI
Indicators	5x, show status of power and Ethernet
Coding switch	13bits valid, 12 of them used to set VLAN ID, 1 of them used to configure uplink type(optical or UTP)
Power Input	+12Vdc, external AC-DC adaptor
Power consumption	≤5W
Operating condition	Operating temp: -25 - +55°C Operating humidity:10-90% (non-condensed)
Storing condition	Storing temp: -30 - +60°C, storing humidity:10-90% (non-condensed)
Dimension	160mm115mm32mm(lengthwidthheight)
Net weight	0.5Kg

Features

Wire speed non-blocking L2 switch
1K MAC address lookup table
VLAN: Supports up to 16 VLAN groups, fully compliant with IEEE802.1Q, uplink supports VLAN tag, VLAN tag will be inserted to upstream data in uplink port and removed from downstream data in uplink port automatically
Supports QoS function on each port, QoS based on ( Port based ,VLAN tag ,TCP/IP header’s TOS/DS)
Configure-able uplink: optical and UTP are optional
Supports broadcast storm filtering function
Supports MAC and PHY loopback detection for diagnosis
Supports CLI through UART