-better than U beam
-good torsion resistance
-digital sensor plus the encrytion
Steel i-beam /i-beam girder digital truck scale(3m×8m SCS-80t)
- 2,accuracy:OIML 3 ( e=20kg )
- 3,safe load limit:125%
- digital weighing indicator XK-3190-DS series .
- RS485 standard interface is combined with digital transducer to communicate, the maximal transmitting distance is up to 1200 meters, regulated by manual or automatic offset loaded system(corner pin), automatically addressing on the odd transducer and reading out data. With fault diagnosis of automatic function, also, can display date, time,leap year,leap month and consecutive clock.Power outage in the protection of data.
- 1,calibrated and optimized by the qwerty keyboard
- 2,printer interface: standard parallel interface
- 3,Optional RS232 communication interface, weighing data can be connected to PC according to management system by microcomputer.
- 4,storage amount: 1000 pieces of datum and 256 groups of vehicle’s number can be printed out.
- 5,power: AC200~240V,49Hz~51Hz Temperature: -10~40 . Relative humidity: 95%RH
- 6,encryption instrument is combined with transducer
Digital weighing transducer HM9B-D-30t(QS-D-30t)
- 1, An analog weighing signal which inside the digital sensor is preprocessed by A/D switching system, in order to output the digital signal ,the sensor’s properties of temperature ,nonlinearity, hysteresis, creep and so on, which can be compensated in automatically.
- 2, standardized sensor in avoidance of calibration after replacement of it.
- 3,Powerful anti-jamming ability, long distance transmission, digital signal(RS485) output can reach 1200meters.wired for scale and remote control can come true.
- 4,the digital sensor is made up from alloy steel ,laser welding,full_sealing. This product is antiseptic and moisture proof.
- 5, applying software in adjusting angular shift, and need no welding resistor, which make it simple and precise to adjust four horns. Also, it is convenient to diagnose the weighing system.
- 6, Digital transmissive interface, lightning protection, which will not affect weighing accuracy
- 7, Use remote controller, the digital signal can prevent common analog transducer from cheating.
- 8,digital sensor plus the encryption can prevent illegal number from cheating even further.
Model selection of the digital weighing transducer
- 1, it is more convenient to choose bridge type load cell.
- 2,digital signal output can prevent tampering, encryption method can keep illegal number from accessing network.
3m× 8m SCS-80t girder truck scale body design:
- 1,body structure:weighing module body characteristic:box-framed structure,whole stiffness,compression,good torsion resistance.
- 2,concrete methods: Designed by weighing capacity and using frequency.body panel adopts 12mm steel plate,10 years' accumulation of the technology on the panel,box_framed girder structure and scale body.there are 6 pieces of longitudinal girders,each one's number is 32A.the service life of the product is long,the structure is made of lane tunnel and a crosspiece on the aspects of durability.
- Scale body always keeps steady when bearing the maximum loading capacity.
- Longitudinal and lateral structure ,integrated design which adopts spacing structure can check limiter of the truck scale(the cover board is no more opened),meanwhile,ease in maintenance.